Aluminium Conductors
The group manufactures various types of Aluminium Conductors catering to the Power Sector. It finds its use in the overhead line conductors for the transmission of electricity. They may or may not have reinforcement based on its end use. We have facilities to produce Aluminium strands upto 61 strands with individual wire diameters ranging from 1.60mm to 8.00mm. We manufacture AAC, AAAC and ACSR with various packing options including coils, wooden drums and steel drums to meet our customer requirement.
MOQ : 20 Metric Ton
| Business Type | Manufacturer, Exporter, Supplier, Trader |
Preferred Buyer From
| Location | Worldwide |
Aluminium Stranded Conductors (ASC) better known as All Aluminium Conductors (AAC) are manufactured from electrolytically refined (E.C.Grade) aluminium, containing a minimum of 99.5% aluminium by weight. The aluminium used has a minium conductivity of 61%. AAC conductors are used mainly in urban areas where the spacing between supports is small and thereby the supports are relatively closer to each other.
All Aluminum Conductors are made up of one or more strands of aluminum wire depending on the required current carrying capacity and used specially as bus conductors at sub-stations. AAC conductors are also used extensively in coastal areas because they have a very high degree of corrosion resistance.
Key Benefits
- Conductivity of AAC conductor is high.
- AAC conductor is corrosion resistant.
Standards
We manufacture AAC conductor as per following standards:
- BS 215 Part 1
- DIN 48201-5
- IS 398 Part 1
- IEC 207
- ASTM B231 : 1981
MOQ : 20 Metric Ton
| Business Type | Manufacturer, Exporter, Supplier, Trader |
Preferred Buyer From
| Location | Worldwide |
Aluminium Conductors Steel Reinforced (ACSR conductors), as the name suggests, consist of a solid or stranded steel core surrounded by strands of Electrolytic grade aluminium. The steel core imparts high mechanical strength to ACSR conductors, which are therefore suitable to be used for river crossings, overhead transmission lines, installations involving extra long spans etc. For any given resistance, ACSR conductors can be manufactured having a wide range of tensile strength as per customer requirements. The principal advantages of these conductors are high tensile strength and high mechanical strength to weight ratio, and therefore they are used for longer spans with fewer supports and lesser sag at a given tension. ACSR is preferred for it’s capacity to withstand extreme wind loads. Due to the greater diameter of ACSR conductors corona losses are low, resulting in substantial savings in high as well as extra high voltage overhead transmission.
Key Benefits
- ACSR conductors have high tensile strength.
- HIgh mechanical strength to weight ratio.
Standards
We manufacture ACSR conductor as per following standards
- BS 215 Part 2
- DIN 48204
- IEC 209
- ASTM B232 : 1981
- IS 398 Part 2 & 5
MOQ : 20 Metric Ton
| Business Type | Manufacturer, Exporter, Supplier, Trader |
| Country of Origin | India |
| Application | Earth Conductor |
| Shape | Round |
| Feature | Durable |
| Speaciality | Good Quality |
| Packaging Type | Box |
Preferred Buyer From
| Location | Worldwide |
