All Aluminium Conductor
| Business Type | Manufacturer, Exporter, Supplier, Trader |
Preferred Buyer From
| Location | Worldwide |
Aluminium Stranded Conductors (ASC) better known as All Aluminium Conductors (AAC) are manufactured from electrolytically refined (E.C.Grade) aluminium, containing a minimum of 99.5% aluminium by weight. The aluminium used has a minium conductivity of 61%. AAC conductors are used mainly in urban areas where the spacing between supports is small and thereby the supports are relatively closer to each other.
All Aluminum Conductors are made up of one or more strands of aluminum wire depending on the required current carrying capacity and used specially as bus conductors at sub-stations. AAC conductors are also used extensively in coastal areas because they have a very high degree of corrosion resistance.
Key Benefits
- Conductivity of AAC conductor is high.
- AAC conductor is corrosion resistant.
Standards
We manufacture AAC conductor as per following standards:
- BS 215 Part 1
- DIN 48201-5
- IS 398 Part 1
- IEC 207
- ASTM B231 : 1981
AAC CONDUCTORS (IS : 398 Part 1 )
| Nominal Alluminium | Stranding & Wire Diameter | Sectional Area | Approx Overall Diameter | Approx. Mass | Calculated Maximum Resistance at 200 Deg C | Approx Calculated Breaking Load |
| mm2 | mm | mm2 | mm | kg/km | ohms/km | KN |
| 25 | 7/2.21 | 26.85 | 6.63 | 74 | 1.09600 | 4.52 |
| 50 | 7/3.10 | 52.83 | 9.30 | 145 | 0.55250 | 8.25 |
| 100 | 7/4.39 | 106.00 | 13.17 | 290 | 0.27520 | 15.96 |
| 150 | 19/3.18 | 150.90 | 15.90 | 415 | 0.19420 | 23.28 |
| 240 | 19/3.99 | 237.60 | 19.95 | 654 | 0.12350 | 35.74 |
| 300 | 19/4.65 | 322.70 | 23.25 | 888 | 0.09107 | 48.74 |
